Call Today

 

 

We have stumbled upon this great article on Hot Water Heater Repair below on the internet and reckoned it made good sense to discuss it with you over here.

Numerous modern-day houses make use of an electrical water heater for their heater, due to its comfort and simplicity of use. However, much like any other electrical appliances, issues might occur with its use, unexpectedly. It can be actually frustrating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm enough and even too hot. Whatever the instance may be, hot water heater troubles can be fairly nerve-racking. The good news is, we've made a listing of feasible solutions to your water heater concerns. There are a number of aspects that can cause much of these problems, maybe an issue with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the problem is, getting it repaired need to not pose too much of a problem if you adhere to these steps:

 

Call An Expert:

If after changing all damaged parts and resetting your temperature level, the hot water heater still isn't working, you may need to call a specialist plumber for a professional opinion. The issue with your heating unit could be that the cold and hot faucets have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly help solve the problem.

 

Inspect Your Power Supply:

As fundamental as this might appear, it is really essential. Without adequate power, your water heater will not function. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently functioning.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might require to inspect the temperature level setups on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the trouble has actually been solved.

 

Inspect the Heating Element in the Water Heater:

If it's not a power problem, then attempt looking into your burner if it is still functioning. Evaluate each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is defective, replace that part and afterwards inspect whether the hot water is back on.

 

Conclusion

Hot water heater issues are not always major. Most of them result from small issues like a blown fuse or worn-out burner. Changing the defective components need to work. However, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I discovered that content on No Hot Water — Water Heater Repair while doing a search on the web. Sharing is good. You never know, you could be helping someone out. I am grateful for your time. Visit us again soon.

Request Free Estimate